WEIPRO Fresh & Salt Water Aquarium Automatic Borosilicate Glass Heater

Description

WEIPRO
-Adjustable/Automatic
-
-
BOROSILICATE GLASS
-
"AQUARIUM HEATER"
-
For Both Fresh & Salt Water Tank
-
-
Easy & Precise setting of desired temperature
-
What's in package:
1 x (100/150/200/300)Watt Aquarium Heater
2 x Strong Suction Cups
Description
Switch complete heater for aquarium submersible with temperature regulator. Easy and precise adjustment of the desired temperature, double insulation waterproofing, heating elements with reinforced insulation. THERMOSTAT the strength Temperature (17 ° – 35 °C). Heating element Large and space, with a practical clip for fastened using suction cups. Each heater is individually tested and calibrated before of are approved for the sales in water. Heating elements with superior insulator Depth doubles. Signal lighting cycle on/off.
Easy and precise setting of desired temperature
Thermometer-style temperature indicator is easy visible
Sensitive and reliable thermostat maintains uniform temperature
Heating element is highly efficient and compact
Designed for extended use and complete safety
Supplied with strong support clips and suction cups
For both Freshwater & Saltwater Aquariums
Features
WATTAGE
100 Watt
VOLT / FREQ
(U.S PLUG)
110-120V / 60Hz
CAPACITY
( Up to 20 Gallons )
BRAND
Weipro
DIMENSIONS
1 x 8.5" ( Tube )
AQUARIUM TYPE
Freshwater & Saltwater
WATTAGE
150 Watt
VOLT / FREQ
(U.S PLUG)
110-120V / 60Hz
CAPACITY
( Up to 40 Gallons )
BRAND
Weipro
DIMENSIONS
1 x 11" ( Tube )
AQUARIUM TYPE
Freshwater & Saltwater
WATTAGE
200 Watt
VOLT / FREQ
(U.S PLUG)
110-120V / 60Hz
CAPACITY
( Up to 50 Gallons )
BRAND
Weipro
DIMENSIONS
1 x 11" ( Tube )
AQUARIUM TYPE
Freshwater & Saltwater
WATTAGE
300 Watt
VOLT / FREQ
(U.S PLUG)
110-120V / 60Hz
CAPACITY
( Up to 75 Gallons )
BRAND
Weipro
DIMENSIONS
1 x 13.75" ( Tube )
AQUARIUM TYPE
Freshwater & Saltwater
Directions
Check heater for any signs of damage before use.
Attach suction cups to the heater at the upper half of glass heating unit.
Mount heater vertically inside aquarium using suction cups. Choose a location with a good water flow. Make sure that the water line is not lower than the bottom of the temperature setting display as this will expose the heating element to air and can cause the heater to fail.
Wait at least 15 minutes before plugging in your heater. This allows the heating unit to adjust to the current temperature of the aquarium water.
Create a drip loop. Then plug the heater into an electrical outlet.
To set heater temperature, use the temperature control knob located on top on the glass heater. Most tropical fish prefer temperatures around 76-82 degrees Fahrenheit.
When the light is on, this indicates that heater is on and heating the water.
When light is off, the temperature (heater) has reached the desired degrees (temperature) setting.
Size
WATTAGE
AQUARIUM CAPACITY
( Recommendation )
100-WATT
Up to 20 gallons
150-WATT
Up to 40 gallons
250-WATT
Up to 50 gallons
300-WATT
Up to 75 gallons
Caution
Heater must always be located in an area with strong circulation of water. If water movement is insufficient, the thermostat will not function accurately, and desired temperature will not be obtained throw out aquarium. You should be able to observe that when heating (lamp on), the warm water is circulated away from heater before rising to the zone of the thermometer scale.
SHIPPING
We offer FREE SHIPPING for all customer.
Return
We accept (
UNUSED ITEM
) returns in 7 Days.
Full Refund
with non-opened item package.
Contact us
if you have any questions, comments or product requests, c
ontact us at any time through eBay messages
.
We will respond to you within 24 hours and do our best to help you out!