-40%
*used* Antminer L3+ Scrypt Miner 504 MH/s Litecoin/Dogecoin With Power Supply
*used* Antminer L3+ Scrypt Miner 504 MH/s Litecoin/Dogecoin With Power Supply

*used* Antminer L3+ Scrypt Miner 504 MH/s Litecoin/Dogecoin With Power Supply

$ 580.79

Availability: 100 in stock
  • Hash Algorithm: Scrypt
  • Brand: Antminer
  • All returns accepted: ReturnsNotAccepted
  • Condition: All 4 hashbords are tested and are working
  • Compatible Currency: Litecoin
  • Mining Hardware: ASIC
  • Power Use (W): 800
  • Model: Antminer L 3

    Description

    AntMiner  L3+ ASIC Miner  With 240V compatible PSU ~504MH/s -   Litecoin/Dogec
    oin
    About this item
    Fastest Litecoin (or other Scrypt-based coin) ASIC miner commercially available!
    Hash Rate: 504MH/s ±7%
    Power Consumption: 800W ±10%
    Built-in controller - No separate host computer required for operation.
    Power supply sold separately. AntMiner APW3++ recommended.
    Product description
    Scrypt Mining Hash Rate: 504MH/s (±7% is expected).
    Compatible Coins: Litecoin and any other Scrypt-based coins.
    Power Consumption: 800W (±10%) at the wall.
    Noise level: Loud. Not for desk-top use. Sounds like a vacuum.
    Chip quantity per unit: 288 x BM1485.
    Rated Voltage: 11.60 ~13.00V.
    Operating Temperature: 0C to 40C.
    Network Connection: Ethernet (cable not included).
    Notes:
    1. Due to the nature of these products, there are higher than normal restocking fees (typically 40%). The restocking fees are typically waived in the event that there is a provable failure within the first 30 days. In the event that you experience a failure, please reach out to the seller immediately so that we can begin troubleshooting with you and/or processing a return.
    2. Each AntMiner L3+ requires NINE 6-pin PCI-e connectors for 12V DC input (must be very stable power supply) There are four hash boards that require two 6-pin PCI-e connectors each and one additional 6-pin PCI-e connector on the controller. All NINE 6-pin PCI-e connectors are required. Do not connect more than one PSU to the same hash board to prevent possible damage and instability.
    3. Power consumption figures will vary with your PSU's efficiency, the ambient operating temperature and the accuracy of the power meter.
    4. Power supply unit is NOT included. Bitmain recommends the APW3++ power supply for the AntMiner L3+.
    5. AntMiners are LOUD. The L3+ sounds like a vacuum and is not recommended for use within homes. Many people use basements or sheds, but returns due to noise will be subject to the full restocking fee.